|
These pictures were taken during the last Perl River
MODROC convention in Perl River, N.Y. The last 2-3 years of this
convention, I was the anniversary kit designer and had the chance to meet many of the
(what I consider) greats of Model Rocketry including Charlie Sykos, Vern Estes, G. Harry
Stein and Art Rose (just to name a very few). These pictures center around Art Rose
on the day that he showed us these very small Czech motors that he obtained, used
primarily for indoor launches. Have fun!
I've arranged this photo album with
thumbnail images along with brief descriptions as well as file size to help you select the
images you wish to see. When you click on a thumbnail you will see the full sized
image. You will need to use your browsers BACK button to return to this album.
| Thumbnail / Link |
Description |
 |
Art Rose shows a
"SuperRoc" that uses these micro sized motors. a SuperRoc that measures
less than ¼" diameter and less then 2 feet long, go figure. If you look
closely, you can see two small items on the lid of the range box. These are not
ignitors nor pieces of scrap balsa. These ARE the model rocket motors that Art will be
demonstrating shortly. |
 |
Here we see Art with
one of the models, preped and loaded on the launch pad ready for launching. A rather
unique setup. Model rocket with recovery device, motor and ignitor in place, sitting
on a launch pad measuring less then 4 inches on a side. Further, a launch pad that
contains a launch rod, battery power, ignitor clips and a LAUNCH BUTTON! |
 |
Intrepid rocketeer
that he is, Art extends his arms, gives us a count down and hits the launch button, much
to the delight of all present (even those nay-sayers who said that these should not have
been launched indoors and not with the launch pad held in the hand, even though this is
exactly how this form of rocketry is designed to be handled) |
 |
Art Rose's son
(Harry?) prepares a static engine test stand to demonstrate how the NAR records the
impulse curve of a model rocket motor |
 |
Fireing of the motor
on the test stand. A computer in the cafeteria recorded the motors thrust curve
which was compaired against specified numbers. |
 |
Art Rose was kind
enough to make some of these micro motors available to me for test purposes. He
commented that he felt that he felt that I would put them to better use toward real
development than many others. I was very proud of that sentement. Here is a
photo of those motors along side two model rockets, a hand formed body tube and hand
formed nosecone. There is also a dime in the picture to provide scale. Both of
these models have flown with wonderful results. I also have a 1:1600 scale flying
SaturnV (the smallest SaturnV to ever fly). |
 |
Here is an end view
photo of the glider from above along side a series of motors: D12, C6, ½A-T, Micro Quest,
and the two sizes of Czech motors |
 |
Top down view of the
picture from above |
| |
|
| |
|
| |
|
|